Here is a picture of this fuse on a Honda Civic. When the jumper cables were connected backward, this fuse blew. This is from a 2015 Honda Civic. Notice the fuse strip. More than one fuse can blow. Once you replace this fuse, start up the car. In most cases, the car should start right up if it doesn’t, continue to Step 2. Step 2 2) if you have a toggle switch for your alarm flip it to the opposite direction. Then turn the key in off position. 3) key in the ignition and turn it 2 clicks right again. 4) flip the toggle switch in the opposite direction again. Then turn the key in the off position again. 5) Now try to start your engine! Step 1: Open the hood and look under the fuse box cover for the Jump Start Terminal. The red positive jumper cable should be connected to the positive terminal in step two. Step 3: Join the other red positive jumper cable to the car receiving the jump’s positive battery terminal. Step 4: Attach the black negative cable clamp to the vehicle The answer is yes! You can use your Toyota Yaris Hybrid to jump-start another car, as long as the other car has a 12-volt battery. To do this, first, make sure that both cars are turned off and in the park. Next, locate the jump starting points under each car’s hood. On the Toyota Yaris Hybrid, these will be on the left side near the headlights. The new Yaris adopts a lithium-ion hybrid battery, with voltage rising from 144 to 177.6V. The number of cells has been reduced, from 120 to 48. The current flow is significantly improved: by 100 per cent into the battery and 50 per cent out of it. With a significantly higher power density, the battery is both smaller and lighter, by 12kg. A Toyota Master Diagnostic Technician explains in simple terms how the high voltage battery works in Toyota Hybrids.In this brand new series I will go over a In this video, we will show where to find the 12 Volt Battery In the 2019, 2020, 2021, 2022, 2023, and 2024 Toyota RAV4 Hybrid.How To Jumpstart The Hybrid RA Turn off the hybrid system and remove your key. Open your hood, the fuse block cover, and the exclusive jump-starting terminal cover. Connect the positive clamp (red) jumper cable to the exclusive jump-starting terminal. Connect the negative clamp (black) to a solid, stationary, unpainted, metallic point of the vehicle with the discharged .

how to jump start toyota yaris hybrid